CP-118U User’s Manual | Software Installation |
F5 Group Edit
This is a convenient function that allows you to edit the configuration of several ports at one time as a group.
Loading the Driver
After completing the setup procedure, run BIN\DP-DRV.EXEfrom the DOS prompt to load the driver. The driver will automatically detect the boards that have already been installed. If one or more board is detected, you will see a message similar the following:
Smartio/Industio Family DOS driver Version 1.5
Setup driver …
CP-118U series (Bus= x ,Dev=y) : OK!
Device driver setup O.K.
This means that the CP-118U Series driver has been installed properly. At this point, you may execute applications that support API-232 functions, or start developing applications using the API-232 library.
Unloading the Driver
To unload (release) the driver from memory, type DP-DRV/Qat the DOS prompt and then press Enter.
Linux
MOXA provides drivers that allow you to use the following serial board products under Linux.
!Universal PCI Boards: CP-118U,CP-168U, CP-104UL, CP-104JU, CP-102U, CP-102UL, CP-134U, CP-134U-I, CP-132UL, CP-132UL-I V2(CP-132U-I V1)
!PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI, CP-114, CP-114I, CP-114S, CP-114IS, CP-132, CP-132I, CP-132S, CP-132IS
!ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS, CI-134, CI-134I, CI-134IS, CI-132, CI-132I, CI-132IS
!cPCI Boards: CT-114I
