Moxa Technologies CP-132U user manual Configuring Another CP-168U Board

Configuring Another CP-168U Board

In this section, we explain how to configure another MOXA CP-168U board that is already installed. Up to four CP-168U boards can be installed in one system under Windows NT, provided sufficient system resources are available.

In addition to the procedures listed below, you may also click on [Start] Æ [Program] Æ [MOXA Utility] Æ [MOXA Smartio/Industio Configuration Panel] Æ [Add], and then refer to the instructions from the previous section, “Installing the Driver.”

1.Open the [Control Panel], click on the [Network] icon, and select the [Adapters] tab.

2.Click on MOXA Smartio/Industio Family Adapter from the Network Adapters list.

3.Click the [Properties] button to open the Moxa Smartio/Industio Configuration Panel dialog box.

3-42 CP-132U Series User’s Manual