Moxa Technologies 405A, EDS-408A Turbo Ring DIP Switch, Setting, Setting, Setting, Description, Description, Description, Factory Default, Factory Default, Factory Default, Time Server IP/Name

EDS-408A/405A Series User’s Manual			Featured Functions
Time Server IP/Name
	Setting	Description	Factory Default
	1st Time Server	IP or Domain address (e.g., 192.168.1.1 or
	IP/Name	time.stdtime.gov.tw or time.nist.gov)	None
	2nd Time Server	EDS will try to locate the 2nd NTP Server if
	IP/Name	the connection to the 1st NTP server failed.
Time Server Query Period
	Setting	Description	Factory Default
	Query Period	This parameter determines how frequently the	600 seconds
		time is updated from the NTP server.

Turbo Ring DIP Switch

EDS-408A/405A series are plug-and-play managed redundant Ethernet switches. The proprietary Turbo Ring protocol was developed by MOXA to provide better network reliability and faster recovery time. MOXA Turbo Ring’s recovery time is less than 300 ms—compared to a 3- to

5-minute recovery time for commercial switches—decreasing the possible loss caused by network failure.

A set of DIP Switches located on EDS-408A/405A’s outer casing can be easily used to configure the Turbo Ring settings in only a few seconds. Some users may wish to disable the Turbo Ring DIP Switches to avoid accidental changes to the configuration. To disable the DIP Switches, start the user interface, and then click on Turbo Ring DIP Switch under Basic Settings. Next, select the checkmark from the Disable the Turbo Ring DIP Switch checkbox.

Turbo Ring DIP Switch

Setting	Description	Factory Default
Enable the Turbo	Unselect the “Disable the Turbo Ring DIP
	Switch” option to enable the entire set of
Ring DIP Switch		Unselect
	Hardware DIP switches.
		(Turbo Ring DIP Switch is
Disable the Turbo	Select the “Disable the Turbo Ring DIP
		enabled)
Ring DIP Switch	Switch” option to disable the entire set of
	Hardware DIP switches.

EDS-408A/405A Series DIP Switches

4 3 2 1

------

MASTER

COUPLER

TURBO

RING

The default setting for each DIP Switch is OFF. The following table explains the effect of setting the DIP Switch to the ON position.

3-9