Moxa Technologies 405A, EDS-408A Configuring Relay Warning, Relay Warning Events Settings, Setting, Activate, Description, Event types, Email Address, Factory Default, Send Test Email

EDS-408A/405A Series User’s Manual				Featured Functions
	Email Address
		Setting	Description	Factory Default
		Max. 30	You can set up to 4 email addresses to	None
		Characters	receive warning emails from EDS.
	Send Test Email
	After finishing with the email settings, you should first press the Activate button to activate those
	settings, and then press the Send Test Email button to verify that the settings are correct.
NOTE	Auto warning e-mail messages will be sent through an authentication protected SMTP server that
	supports the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and
	Security Layer) authentication mechanism.
	We strongly recommend not entering your Account Name and Account Password if auto warning
	e-mail messages can be delivered without authentication mechanism.

Configuring Relay Warning

The Auto Relay Warning function uses relay output to alert the user when certain user-configured events take place. There are two basic steps required to set up the Relay Warning function:

1.Configuring Relay Event Types

Select the desired Event types from the Console or Web Browser Event type page (a description of each event type is given later in the Relay Warning Events setting subsection).

2.Activate your settings

After configuring, you will need to activate your MOXA EtherDevice Switch’s Relay Event Types.

Relay Warning Events Settings

NOTE: The user interface for EDS-408A shows 8 ports.

3-41