Moxa Technologies 405A, EDS-408A System File Update—ByRemote TFTP, TFTP Server IP/Name, Firmware file path and name, Configuration file path and name

EDS-408A/405A Series User’s Manual		Featured Functions
NOTE	The Turbo Ring Ports and Coupling Ports will be added to all VLANs if you enable the “Turbo
	Ring DIP Switch” and set Turbo Ring DIP Switch from OFF to ON.
NOTE	If you enable the Hardware DIP Switch for Turbo Ring and set the Turbo Ring DIP Switch from
	ON to OFF, then the Ring Ports and Coupling Ports which are added to all VLANs are restored
	to their previous software settings. (For details on how to do this, please refer to “Using Virtual
	LAN”).

System File Update—By Remote TFTP

MOXA EtherDevice Switch supports saving your configuration file to a remote TFTP server or local host to allow other EtherDevice Switches to use the same configuration at a later time, or saving the Log file for future reference. Loading pre-saved firmware or a configuration file from the TFTP server or local host is also supported for easy upgrading or configuration of the EtherDevice Switch.

TFTP Server IP/Name

	Setting	Description	Factory Default
	IP Address of the	The IP or name of the remote TFTP server.
		Must be set up before downloading or	None
	TFTP Server
		uploading files.
Configuration file path and name
	Setting	Description	Factory Default
	Max. 40	The path and file name of the EtherDevice	None
		Switch’s configuration file on the TFTP
	Characters
		server.
Firmware file path and name
	Setting	Description	Factory Default
	Max. 40	The path and file name of the EtherDevice	None
	Characters	Switch’s firmware file.

3-11