Fiber Driver® EM316SW-XY
PN 1288003-001, Rev D2 13
3.3.2 Switch Functions and Default Settings
The switch block number is not sequential on the module. Carefully verify the switch block
number and placement before changing switch settings.
Switch Block 1*
DIP Switch DIP Switch Name Setting Description
ON (up) Control by NM is enable
1 MANG EN OFF (down) Control be NM is disable
ON (up) LIN enable
2 LIN EN
OFF (down) LIN disable
ON (up)
3 AGING F OFF (down) NOT USED
ON (up)
4 OFF (down) NOT USED
ON (up)
5 MODE1 OFF (down)
ON (up)
6 MODE0 OFF (down)
See table below
ON (up) P1 Auto Negotiation is enable
7 ANEG OFF (down) P1 Auto Negotiation is disable
ON (up) P4 Auto Negotiation is enable
8 ANEG2
OFF (down) P4 Auto Negotiation is disable
SW1-5, SW1-6 – Operational Modes
DIP Switches
Mode MODE1 MODE0 Port Grouping
Dual Repeater ON ON Fiber Repeater: ports P2 & P3
Copper Repeater: ports P1 & P4
Dual Converter
(default mode) ON OFF
Converter 1: ports P1 & P2
Converter 2: ports P3 & P4
Redundant Link OFF ON Redundant: fiber optic ports P2 & P3
Local: copper port P1
Unused: copper port P4
Mixed-Media Switch OFF OFF All ports (P1, P2, P3, P4)