Fiber Driver® EM316SW-XY
PN 1288003-001, Rev D2 22
3.3.3.5 Bale Clasp SFP Module
The bale clasp SFP module has a bale clasp that you use to secure the SFP\XFP module in
a switching module port.
Figure 22 -- Bale Clasp SFP Module
3.3.3.5.1 Inserting a Bale Clasp SFP/XFP Module into a Switching Module Port
Step 1 Close the bale clasp in the upward direction before inserting the SFP module.
Step 2 Line up the SFP module with the port and slide it into the port.
Figure 23 -- Insertion of a Bale Clasp SFP Module
3.3.3.5.2 Removing a Bale Clasp SFP Module
Step 1 Open the bale clasp on the SFP module: With your index finger, press the clasp
downward as shown. If the bale clasp is obstructed and you can not use your index finger to
open it, use a small, flat-blade screwdriver or other long, narrow instrument to open the bale
clasp as shown.
Step 2 Grasp the SFP module between your thumb and index finger and carefully remove it
from the switching module port as shown.
Open a Bale Clasp with a Flat-Blade Screwdriver if needed.
Figure 24 -- Removal of a Bale Clasp SFP Module