Fiber Driver® EM316SW-XY
PN 1288003-001, Rev D2 51
4.3.7.4 “description”
As with a module at the slot level, a descriptive name may be applied to each port. An
example of the description command at the port level is shown below.
fiberdriver(port/1.3.1)#
d
escription SWXY
-
port1
fiberdriver(port/1.3.1)# show
Port: 1.3.1
Name: SWXY-port1
Protocol: Ethernet
Rate: 10Base-T 10 Mbps
Enable: enable LIN: disable
Link: no Signal Speed: 10 Mbps
MDI Pinout: mdi
Duplex: half MDI Pinout desired: auto Sense
Auto Neg: on
Adv 10Base-T: on
Adv 100Base-Tx: on
Connector: RJ45 Medium: twisted Pair
Rx Activity: off Tx Activity: off
fiberdriver(port/1.3.1)#