Mounting Screw Holes
When installing the mainboard, first install the necessary mounting stands re- quired for a mainboard on the mounting plate in your computer case. If there is an I/ObackplateO/back plate that came with the computer case, please replace it with the I/O I
backplate that came with the mainboard package. The I/O backplate should snap easily into the computer case without the need for any screws. Align the mounting . plate’s mounting stands with the screw holes on the mainboard and secure the mainboard with the screws provided with your computer case. The locations of the screw holes on the mainboard are shown below. For more information, please refer to the manual that came with the computer case.
heT /OIports should be facing toward the rear of the computer case. They should line up with the holes on the
Important
* Install the mainboard on a flat surface free from unnecessary debris.
* To prevent damage to the mainboard, any contact between the mainboard cir- cuitry and the computer case, except for the mounting stands, is prohibited.
* Please make sure there are no loose metal components on the mainboard or within the computer case that may cause a short circuit of the mainboard.
18
