MSI Z87-MPOWER-MAX manual Xxxx-Xxxxxxxx

Appendix B

■Reset Disks to Non-RAID

Select option 3 Reset Disks to Non-RAID and press <Enter> to delete the RAID volume and remove any RAID structures from the drives. The following screen appears:

					[	MAIN MENU	]
	1.	Create RAID Volume					4.	Recovery Volume Options
	2.	Delete RAID Volume			[ RESET RAID DATA4. ]			Recovery Volume Options
		Resetting RAID disk will5. removeExit its RAID structures
		and revert [it DISKto a /nonVOLUME-RAIDINFORMATIONdisk.							]
RAID Volumes :
None	defined.WARNING : Resetting a disk causes all data on the disk to be lost.
			(This does not apply to Recovery volumes)
	Port Drive		Model			Serial #			Size		Status
Physical		Devices :				XXXXXXXXXXXXXX			XXX.XGB		Member Disk
Port	1	XXXX-XXXXXXXX
	Device Model			Serial #		XXXXXXXXXXXXXX			Size	Type/Status (Vol ID)
1	2	XXXX-XXXXXXXX							XXX.XGB		Member Disk
	XXXX-XXXXXXXX			XXXXXXXXXXXXXX				XXX.XGB		Non-RAID Disk
2	XXXX-XXXXXXXX			XXXXXXXXXXXXXX				XXX.XGB		Non-RAID Disk
				Select		the disks that	should be		reset.
		[ ↑↓] - Previous/ Next			[SPACE] - Selects		[ENTER] - Selection Complete
	[ ↑↓] - Select				[ESC] - Exit			[ENTER] - Select Menu

Use the <Space> key to select the disks and press <Enter> key. A confirmation sentence will appear below, and then press <Y> key to accept the selection.

Important

•You will lose all data on the RAID drives and any internal RAID structures when you perform this operation.

•Possible reasons to “Reset Disks to Non-RAID” could include issues such as incompatible RAID configurations or a failed volume or failed disk.

Intel RAID B-8