![](/images/new-backgrounds/1319060/319060173x1.webp)
▶DRAM Timing Mode [Auto]![](/images/new-backgrounds/1319060/319060173xi2.webp)
![](/images/new-backgrounds/1319060/319060173xi3.webp)
![](/images/new-backgrounds/1319060/319060173xi4.webp)
Selects the memory timing mode.
[Auto] | DRAM timings will be determined based on SPD (Serial Presence |
| Detect) of installed memory modules. |
[Link] | Allows user to configure the DRAM timing manually for all memory |
| channel. |
[UnLink] | Allows user to configure the DRAM timing manually for respective |
| memory channel. |
▶Advanced DRAM Configuration
Press <Enter> to enter the
▶DRAM Training Configuration
Press <Enter> to enter the
▶Memory Fast Boot [Auto]
Enables or disables the initiation and training for memory every booting.
[Auto] | This setting will be configured automatically by BIOS. |
[Enabled] | Memory will completely imitate the archive of first initiation and first |
| training. After that, the memory will not be initialed and trained when |
| booting to accelerate the system booting time. |
[Disabled] | The memory will be initialed and trained every booting. |
▶DigitALL Power
Press <Enter> to enter the
▶CPU Phase Control [Auto]
Controls PWM phase proportionally to the CPU loading. If set to "Auto", BIOS will optimize the CPU PWM phase automatically.
[Auto] | This setting will be configured automatically by BIOS. |
[Disabled] | Disables the PWM power phase switching feature. |
▶CPU Vdroop Offset Control [Auto]
Sets a percentage of offset voltage for CPU vdroop. If set to "Auto", BIOS will configure this setting automatically. [Options: Auto, +12.5%, +25%, +37.5%, +50%, +62.5%, +75%, +87.5%, +100%]
▶CPU Over Voltage Protection [Auto]
Sets the voltage limit for CPU
Chapter 3
BIOS Setup |