![](/images/new-backgrounds/1319060/319060177x1.webp)
▶CPU Core Voltage Offset Mode/ CPU Ring Voltage Offset Mode/ CPU GT Voltage Offset Mode/ CPU SA Voltage Offset Mode/ CPU IO Analog Voltage Offset Mode/ CPU IO Digital Voltage Offset Mode [Auto]
Selects the voltage offset modes.
[Auto] | This setting will be configured automatically by BIOS. |
[+]Allows you to set the positive offset voltage.
Allows you to set the negative offset voltage. |
▶CPU Core Voltage Offset/ CPU Ring Voltage Offset/ CPU GT Voltage Offset/ CPU SA Voltage Offset/ CPU IO Analog Voltage Offset/ CPU IO Digital Voltage Offset [Auto]
Set the offset values for these voltages.
▶Current CPU Core Voltage/ Current CPU Ring Voltage/ Current CPU GT Voltage/ Current CPU SA Voltage/ Current CPU IO Digital Voltage
Show the current voltages.
▶Internal VR OVP OCP Protection [Auto]
Enables or disables the
[Auto] | This setting will be configured automatically by BIOS. |
[Enabled] | Sets the voltage limit on the CPU internal VR for |
| and |
[Disabled] | Disables this function for overclocking. |
▶Internal VR Efficiency Management [Auto]
Enables or disables the CPU internal VR efficiency management.
[Auto] | This setting will be configured automatically by BIOS. |
[Enabled] | Enables the VR effciency management for |
[Disabled] | Disables this function. |
▶DRAM Voltage [Auto]
Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically or you can set it manually.
▶Current DRAM Voltage
Shows current memory voltage. Read only.
▶DDR_VREF_CA/ DDR_VREF
_DQ_A/ DDR_VREF
_DQ_B/ PCH 1.05 Voltage/ PCH 1.5 Voltage
Set these voltages. If set to "Auto", BIOS will set these voltages automatically or you can set it manually.
▶Current PCH 1.05 Voltage
Shows current PCH 1.05 voltage. Read only.
▶CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the CPU or memory has been replaced.
[Enabled] | The system will issue a warning message during boot and than needs |
| to load the default settings for new devices. |
[Disabled] | Disables this function and keeps the current BIOS settings. |
Chapter 3
BIOS Setup |