Clarion VRX610 owner manual Error Displays

	Problem		Cause	Measure
	When the TV	Bad receiving condition		A radio wave may not reach sufficiently due to
	tuner is con-			obstruction of mountains or buildings. Check it again
	nected, the image			at a place where a radio wave can be received
	gets unclear.			properly.
	The TV tuner has	Bad receiving condition		It may be under the influence of radio wave reflected
	a double or triple			by mountains or buildings. Check it again after
	image.			changing place or direction.
TV
	The TV tuner has	Presence of jamming		It may be under the influence from automobiles,
	spots or stripes in			streetcar, power cable, neon sign, and so forth.
	the image.			Check it again after changing place.
	There are red,			This is not a failure, but a phenomenon peculiar to a
	green, and blue			liquid crystal panel (The LCD panel is produced
	points in the			according to technology with very high precision.
	display.			Note that, though there are effective pixels of 99.99%
				or more, pixel missing or normally lit pixels account
				for 0.01%).

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described to eliminate the problem.

	Error Display	Cause	Measure
	ERROR 2	A CD is caught inside the CD deck and is	This is a failure of CD deck’s mechanism
		not ejected.	and consult your store of purchase.
CD	ERROR 3	A CD cannot be played due to scratches,	Replace with a non-scratched,
		etc.	non-warped-disc.
	ERROR 6	A CD is loaded upside-down inside the CD	Eject the disc then reload it properly.
		deck and does not play.
CHANGER	ERROR 2	A CD inside the CD changer is not loaded.	This is a failure of CD changer’s mecha-
			nism and consult your store of purchase.
	ERROR 3	A CD inside the CD changer cannot be	Replace with a non-scratched, non-warped-
		played due to scratches, etc.	disc.
CD	ERROR 6	A CD inside the CD changer cannot be	Eject the disc then reload it properly.
		played because it is loaded upside-down.
	ERROR H	Displayed when the temperature in the	Lower the surrounding temperature and
		MD changer is too high and playback has	wait for a while to cool off MD changer.
		been stopped automatically.
MDCHANGER	ERROR 2	An MD inside the MD changer is not	This is a failure of MD changer’s mecha-
		loaded.	nism and consult your store of purchase.
	ERROR 3	An MD inside the MD changer cannot be	Replace with a non-scratched, non-warped-
		played due to scratches, etc.	disc.
	ERROR 6	An MD inside the MD changer cannot be	Eject the disc then reload it properly.
		played because it is loaded upside-down.
		Displayed when a non-recorded MD is	Load a pre-recorded MD in the MD
		loaded in the MD changer.	changer.

If an error display other than the ones described above appears, press the RESET button. If the problem persists, turn off the power and consult your store of purchase.

40 VRX610 VRX610 41