Standard mode/G.EQ opera, Tions, G.EQ effect ON/OFF

DSP operations

	Standard mode/G.EQ opera-	ing display, in which the properties of currently
	Standard mode/G.EQ opera-	selected pattern can be adjusted.
		selected pattern can be adjusted.

8. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU” and press the ENT at

∗ By pressing the BAND button % in BASIC pat-

tern selecting display or USER pattern selec-

tions

Note:

• The adjustment made in standard mode is not re-

flected in the adjustment in professional mode. Re-

spectively, the adjustment made in professional mode

∗ By pressing the BAND button % in BASIC pat-

tern selecting display or USER pattern selec-

tion/memory display you can switch between

the two patterns, BASIC and USER.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the center of the JOYSTICK ¡to change into

the AUDIO-MODE display.

Standard mode/DSF operations

tion/memory display you can switch between

the two patterns, BASIC and USER.

5. Operate the JOYSTICK ¡ rightward or left-

ward to select “MENU”, and press the ENT at

the center of the JOYSTICK ¡ to return to

the AUDIO-MODE display.

is not reflected in the adjustment in standard mode.

the AUDIO-MODE display.

DSF effect ON/OFF

Setting and storing DSF Properties/

G.EQ effect ON/OFF

∗The factory default setting is “ON”.

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “EQ ON/OFF”. “ON” and “OFF” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡rightward or leftward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set it.

4.After the setting, press the A-M button & again to return to the STANDARD display.

Note:

•If the G.EQ effect is set to OFF, the adjustment made in “G.EQ operations” is not reflected in the music source.

Calling G.EQ BASIC Pattern/USER Pattern

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “EQ MODE”. “BASIC” and “USER” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward or left- ward to select the item thus called, and press the ENT at the center of the JOYSTICK ¡ to show BASIC pattern selecting display or USER pattern selection/memory display.

4.In the Pattern selecting display, operate the JOYSTICK ¡ rightward or leftward to select P1 to P6, and press the ENT at the center of the JOYSTICK ¡ to call corresponding G.EQ pattern. In this display, pressing the No. but- ton in correspondence to the PRESET button

# can also call the G.EQ pattern.

∗After selecting P1 to P6 by the JOYSTICK ¡, press ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to copy the selected pattern to the USER pattern.

∗Operate the JOYSTICK ¡rightward or leftward

to select “EDIT”, and press the ENT at the cen- ter of the JOYSTICK ¡ to show G.EQ adjust-

Setting and storing G.EQ Proper- ties/Memory into USER Pattern

1. Repeat the steps 1 to 3 of the previous proce-

dure (Calling G.EQ BASIC Pattern/USER Pat-

tern) to show BASIC pattern selecting display

or USER pattern selection/memory display.

2. Operate the JOYSTICK ¡ leftward and right-

ward to select “EDIT”, and press the ENT at

the center of the JOYSTICK ¡ to show the

G.EQ adjusting display.

3. When some frequency to be adjusted is se-

lected by operating the JOYSTICK ¡ right-

ward or leftward in the G.EQ adjusting display,

a gain setting value at the selected frequency

is displayed.

4. Operate the JOYSTICK ¡ upward or down-

ward to adjust the G.EQ GAIN.

∗ By pressing the PRESET buttons #once in the

G.EQ adjusting display, the setting value for cur-

rently stored USER pattern is obtained.

5. After making adjustments to a desired pattern

by repeating the operations of items 3 and 4,

operate the JOYSTICK ¡ rightward or left-

ward to move the cursor to “RTN”, and press

the ENT at the center of the JOYSTICK ¡ to

change over to the BASIC/USER pattern se-

lection/memory display.

6. Operate the JOYSTICK ¡rightward or leftward

in the BASIC/USER pattern selection/memory

display to select USER memory P1 to P6 to be

stored, and press the ENT at the center of the

JOYSTICK ¡ for 2 seconds or longer to store

the adjusted G.EQ pattern to the USER memory.

∗ By pressing the PRESET button # 1 to 6 for 2

seconds or longer in the G.EQ adjusting dis-

play, the G.EQ pattern can be stored in the

USER memory.

7. To set a title of the stored USER pattern, op-

erate the JOYSTICK ¡ rightward or leftward

to select “TITLE” and press the ENT at the

center of the JOYSTICK ¡ to change into the

Title Input display.

∗ For title inputting method, refer to the section

“Entering titles”.

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “DSF ON/OFF”. “ON” and “OFF” items are displayed in the menu bar.

3.Operate the JOYSTICK ¡ rightward and left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set it.

Note:

•If the DSF effect is set to OFF, the adjustment made in “DSF operations” is not reflected in the music source.

Calling DSF BASIC Pattern/USER Pattern

1.Press the A-M button & to show the AUDIO- MODE display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “DSF MODE”. “BASIC 1”, “BA- SIC 2” and “USER” items are displayed in the menu bar.

4.In the pattern selecting display, operate the JOYSTICK ¡ rightward or leftward to select P1 to P6, and press the ENT at the center of the JOYSTICK ¡ to call corresponding DSF mode. In this display, pressing the No. button in correspondence to the PRESET buttons # can also call the DSF mode.

∗After selecting P1 to P6 by operating the JOY- STICK ¡, press the ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to copy the selected pattern to the USER pattern.

∗Operate the JOYSTICK ¡ rightward or left-

ward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show DSF adjusting display, in which the properties of cur- rently selected pattern can be adjusted.

Memory into USER Pattern

1.Repeat the steps 1 to 3 of the previous proce- dure (Calling DSF BASIC Pattern/USER Pat- tern) to show BASIC pattern selecting display or USER pattern selection/memory display.

2.Operate the JOYSTICK ¡ upward or down- ward to select “EDIT”, and press the ENT at the center of the JOYSTICK ¡ to show the DSF adjusting display.

3.Select an item to be adjusted by operating the JOYSTICK ¡rightward or leftward in the DSF adjusting display.

“EF” ➜ EFFECT “DL” ➜ DELAY “R.M” ➜ REAR MIX “R.S” ➜ ROOM SIZE “LV” ➜ LIVENESS “R.T” ➜ REVERB TIME “HI” ➜ HIGH

4.Operate the JOYSTICK ¡ upward or down- ward to set each adjusting value.

∗By pressing the PRESET buttons # once in the DSF adjusting display, the setting value for currently stored USER pattern is obtained.

5.After making adjustments to a desired pattern by repeating the operations of items 3 and 4, operate the JOYSTICK ¡ rightward or left- ward to move the cursor to “RTN”, and press the ENT at the center of the JOYSTICK ¡ to change over to the BASIC/USER pattern se- lection/memory display.

6.Operate the JOYSTICK ¡ rightward or left- ward in the BASIC/USER pattern selection/ memory display to select USER memory P1 to P6 to be stored, and press the ENT at the cen- ter of the JOYSTICK ¡for 2 seconds or longer to store the adjusted DSF pattern to the USER memory.

∗By pressing the PRESET buttons # 1 to 6 for 2 seconds or longer in the DSF adjusting display, the DSF pattern can be stored in the USER memory.

34 VRX610

VRX610 35

Clarion VRX610 Standard mode/G.EQ opera, Standard mode/DSF operations, G.EQ effect ON/OFF

Models: VRX610