TV Operations
TV Operations
TV functions
press and hold the BAND button % for 1 sec-
Manual memory | Setting the TV diver |
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner.
WARNING
For your safety, the driver should not watch the TV or operate the controls while driv- ing. Please note that watching and operat- ing the TV while driving are prohibited by law in some countries.
Watching TV
Notes:
ond or longer. “MANU” in the display goes off (or when the panel is closed, the indicator “SRCH” lights) and seek tuning is now avail- able.
2.Press the right or left side of the SEARCH button 2 to automatically seek a station. Press the right side of the SEARCH button
2 to automatically tune up the frequency band to the next available TV station; press the left side to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the de-
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the cur- rent station to that preset memory.
Auto store
Auto store selects 6 TV stations automatically and stores each one into a preset memory.
If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.
1.Press the BAND button % and select the de- sired TV band. (TV1 or TV2)
∗This function is enabled only when the panel is open.
∗Normally use the TV diver with the “ON” position. You can change the reception setting for the TV antenna connected to the TV tuner.
1.Press the ADJ button * to switch to the ad- justment selection display.
2.Operate the JOYSTICK ¡ upward or down- ward to select “TV DIVER”.
3.Operate the JOYSTICK ¡ rightward or left- ward to select “ON” or “OFF” and press the ENT at the center of the JOYSTICK ¡ to set the selected reception setting.
● ON:
•For your safety, this unit has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the park- ing break is applied.
1.Press the FUNC button 1 and select the TV mode.
2.Press the BAND button % to select the de- sired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.
3.Press the right or left side of the SEARCH button 2 to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12V video cassette player (VCP) or video cas-
sired frequency.
1.Press the BAND button % and select the de- sired band. (TV1 or TV2)
∗If “MANU” is not lit in the display (or when the
panel is closed, if the indicator “SRCH” is lit), press and hold the BAND button % for 1 sec- ond or longer. “MANU” appears in the display (or when the panel is closed, the indicator “SRCH” goes off) and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the right or left side of the SEARCH button 2for 1 second or longer to tune in a station.
●Step tuning:
Press the right or left side of the SEARCH but- ton 2 to manually tune in a station.
2.Press and hold the AS/PS button 5for 2 sec- onds or longer. The stations with good recep- tion are automatically stored to the PRESET buttons # .
Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for desired TV station in memory.
1.Press the AS/PS button 5.
2.When the desired channel is received, press the AS/PS button 5 again.
Switching the VTR system between NTSC and PAL
∗This function is enabled only when the panel is open.
Sets reception emphasizing the visual.
●OFF:
Sets the diver setting to OFF.
4.Press the ADJ button * return to the previ- ous mode.
sette recorder (VCR) to the TV tuner input termi- nal.
1.Press the RDM button 8and select the VTR.
2.To return to the TV broadcast, press the RDM button 8 again.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Note:
•Manual tuning is cancelled if you do not operate the unit for 7 seconds longer.
Recalling a preset station
A total of 12 TV stations can be stored
1.Press the BAND button % and select the de- sired TV band. (TV1 or TV2)
Switch to the VTR mode you use.
1.Press the ADJ button * to switch to the ad- justment selection display.
2.Operate the JOYSTICK ¡ upward or down- ward to move the cursor to “VTR N/P”.
3.Operate the JOYSTICK ¡ rightward or left- ward to move the cursor to select “NTSC” or “PAL”.
4.Press the ENT at the center of the JOYSTICK
¡ to set the selected VTR mode.
Seek tuning | 2. To recall a stored TV station, press the de- |
1. Press the BAND button % and select the de- | sired PRESET buttons # to select that sta- |
sired TV band (TV1 or TV2). | tion. |
∗ If “MANU” is lit in the display (or when the panel | ∗ Press and hold one of the PRESET buttons # |
is closed, if the indicator “SRCH” is not lit), | for 2 seconds or longer to store the current sta- |
| tion into the preset memory. |
26 | VRX610 | VRX610 | 27 |
