Clarion VRX610 Rear Vision Camera, Switching to Composite Screen, Changing over TV display size

TV Operations

Adjusting the brightness and tone	Changing over TV display size
of color	∗ This function is available only when the panel is
Notes:	open.
	Press the WIDE button 7 to change over the
• This operation is available only when the car is
	TV display size. Each time you press the
stopped and the parking brake is applied.
• This function is not available when the display is	WIDE button 7, the TV display size changes
stored.	in the following order:
• The HUE setting can be adjusted only when the	“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜ “CIN-
NTSC mode is selected.	EMA” ➜ “NORMAL”
1. Press the ADJ button * to switch to the ad-	● “NORMAL”: (normal display)
justment selection display.
	There is a black area at both right and left
2. Operate the JOYSTICK ¡ upward or down-
	ends of a display. In case of normal TV broad-
ward to select the option “MONI ADJ” (by
	casting (4:3), the image can be shown with-
moving the cursor).
	out being cut or deformed.
3. Press the ENT at the center of the JOYSTICK
	● “WIDE”: (wide mode)
¡.
	The image at right and left ends in a display
4. Operate the JOYSTICK ¡ rightward or left-
	elongates horizontally.
ward to select “BRIGHT”,“COLOR” or “HUE”
	● “F. WIDE”: (full wide mode)
(by moving the cursor).
	The whole image elongates horizontally.
● “BRIGHT“:
	● “CINEMA”: (cinema mode)
Adjust the brightness of the display.

Rear Vision Camera

Monitoring the rear vision camera

The rear vision camera can be connected to this unit. For the power supply of the camera, mount the power box sold separately (CAA-147).

Notes:

•This function is not available when the display is stored.

Operation of External Visual Devices (VISUAL Mode)

External visual devices such as DVD and VTR devices can be connected to the DIN 8-pin ter- minal, and the image and sound can then be played using VISUAL mode.

Notes:

•While driving, the image of the VISUAL Mode is turned OFF and only sound is played.

•Images can only be played when the vehicle is stationary with the parking brake ON.

1. With the panel open, push VISUAL button )
	to switch from radio, TV, CD/MD changer
	mode to VISUAL mode.
2. To exit VISUAL Mode and return to the previ-
	ous mode, press VISUAL button ) again.
∗	The image format played in VISUAL mode can
	be set to NTSC or PAL format. The setting
	method is the same as for the TV. Please refer
	to the TV explanation.
∗	In VISUAL mode, the picture quality can be ad-
	justed. The setting method is the same as for
	the TV. Please refer to the TV explanation.

●“COLOR“:

Adjusts the color saturation.

●“HUE“:

Adjusts the tone of color (red is emphasized or green is emphasized.)

5.Operate the JOYSTICK ¡ upward or down- ward to adjust a level.

6.When the adjustment is made, operate the JOYSTICK ¡ rightward or leftward to move the cursor to “MENU”. Then press the ENT at the center of the JOYSTICK ¡ to return to the adjustment selection display.

The image at both top and bottom in a dis- play disappears.

Notes:

•When a normal 4:3 size image, not being a wide one, is viewed by displaying it fully on a wide TV display in a wide mode or a full-wide mode, a part of the peripheral image will be lacking or deformed. In deference to the intention of producer, an origi- nal image can be viewed in a normal mode.

•During superimposed display, it becomes a full- wide mode.

Switching to Composite Screen

∗The display panel can be switched to a composite screen to lock the monitor or to view a video CD.

1.When the panel is open, press the OPEN/ M.LOCK button ! to switch to the compos- ite screen.

2.When the panel is open and the composite screen is shown, press the OPEN/M.LOCK button

!again to return to the previous screen.

28 VRX610 VRX610 29