This setting will be configured automatically by BIOS.
All CPU cores would be increased to maximum turbo ratio. Disables this function.
3-17

[Next Boot]

CPU will run the adjusted CPU base clock after reboot.

[Immediate]

CPU runs the adjusted CPU base clock immediately.

▶CPU PCIE PLL [Auto]

Selects a PLL (Phase Lock Loop) mode for CPU PCIe. This item appears when the installed CPU supports this setting.

[Auto]

This setting will be configured automatically by BIOS.

[LC PLL]

Enables LC PLL for normal usage.

[SB PLL]

Enables SB PLL for extreme overclocking.

▶Filter PLL [Auto]

Enables or disables the filter PLL for CPU. This item appears when the installed CPU supports this setting.

[Auto]

This setting will be configured automatically by BIOS.

[Enabled]

Provides wide range of base clock for overclocking when base clock

 

strap be set to higher value.

[Disabled]

Provides normal range of base clock.

▶CPU Ratio Mode [Auto]

Selects the CPU Ratio operating mode.

[Auto]

This setting will be configured automatically by BIOS.

[Fixed Mode]

Fixes the CPU ratio.

[Dynamic Mode]

CPU ratio will be changed dynamically according to the CPU

 

loading.

▶Adjust CPU Ratio [Auto]

Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.

▶Adjusted CPU Frequency

Shows the adjusted CPU frequency. Read-only.

▶EIST [Enabled]

Enables or disables the Enhanced Intel® SpeedStep Technology.

▶IntelTurbo Boost [Enabled]

Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU supports this function.

[Enabled]

Enables this function to boost CPU performance automatically above

 

rated specifications when system request the highest performance

 

state.

[Disabled]

Disables this function.

▶EnhancedTurbo [Auto]

Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance.

[Auto]

[Enabled]

[Disabled]

Chapter 3

BIOS Setup

Page 85
Image 85
MSI Z87-MPOWER-MAX Next Boot, Enables LC PLL for normal usage, Enables SB PLL for extreme overclocking, Loading, State