MSI Z87-MPOWER-MAX manual Save & Exit, Make U-Key at

▶Make U-Key at

Makes a key at the USB flash drive to prevent other people from accessing the system. Only the user who has the key with the flash drive can access the system.

▶Chassis Intrusion Configuration Press <Enter> to enter the sub-menu.

▶Chassis Intrusion [Disabled]

This function will be available if the chassis equips a chassis intrusion switch. Once the chassis is opened, the system will record and issue a warning message. To clear the warning message, set the item to [Reset], then it will return to [Enabled] later. [Options: Disabled, Enabled, Reset]

Save & Exit

▶Discard Changes and Exit

Exit BIOS setup without saving any change. This it is used to abandon all changes and exit BIOS setup.

▶Save Changes and Reboot

This item is used to save all changes and reboot the system.

▶Save Changes

This item is used to save current changes.

▶Discard Changes

This item is used to discard current all changes and restore to the previous values. ▶Restore Defaults

This item is used to restore/ load all default values by the BIOS vendor.

▶Boot Override

The installed boot-able devices will appear on this menu, you can select one of them be a boot device to start booting.

Chapter 3

3-15 BIOS Setup