Multi-Tech Systems MVP120 manual Configuring the Master MultiVOIP

Chapter 4 - Configuring the Master MultiVOIP

38.To configure a stand-alone endpoint (a PC with NetMeeting software), click Add and the Add/Edit Phone Entry dialog box displays again.

39.Enter the phone number for the stand-alone endpoint in the Station Information group Phone Number box. For example, 301.

40.Click inside the Description box and enter a description for the remote stand-alone phone number. For example, “Human Resources Desk”.

Note: Because the H.323 endpoint is not a MVP120, the Phone Directory database ignores the Voice Channel entry. Set the Channel to 1.

41.In the Station Identification group, select NO HUNT from the Hunt Group list, enter the Human Resource Desk’s IP Address and accept the H.323 industry standard Port value (1720) used to communicate with other H.323 endpoints.

Note: This stand-alone was not configured as part of a Hunt Group. However, depending on your requirements, you could configure a stand-alone to be part of a Hunt Group.

42.Click OK and you are returned to the Phone Directory Database dialog box which now includes the stand-alone phone number and related information in the Phone Number list.

Multi-Tech Systems, Inc. MultiVOIP User Guide 34