Chapter 8 - Remote Configuration and Management
In the Dial String box, enter the AT command for dialing (ATDT) plus the phone number of the remote MVP120.
If your Modem Initialization String, Initialization Response, or Connect Response values are different from the defaults in the dialog box, refer to your modem user documentation and change the default values to match your modem.
Click OK when you are satisfied with your selections.
6.Run the MVP120 Configuration program. Click Start Programs MultiVOIP 100 MultiVOIP Configuration, or
7.The Dialing dialog box displays while software is dialing the remote MultiVOIP.
8.The Reading Setup dialog box displays.
9.The MultiVOIP 100 Setup menu displays. This is the dialog box of the remote MultiVOIP. Refer to the online Help for a description of the user interface.
10.After you have changed the configuration of the remote MultiVOIP, click Download Setup to update the configuration. The remote MultiVOIP will be brought down, the new configuration written to the unit, and the unit will reboot.
11.Click Exit when downloading is complete.
12.The Hangup connection? dialog box displays.
Click Yes to disconnect the phone connection to the remote site.
13.If the same telephone number is not going to be used again in the immediate future, you can remove it from the Port Setup dialog box.
69 |
