Multiplex Technology 21 4211 GB

# 21 4211

Examine your kit carefully!

MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope

that you are happy with the contents of your kit. However, we would ask you to check all the parts before you start

construction, as we cannot exchange components which you have already worked on. If you find any part is not

acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model Department.

Please be sure to include a brief description of the fault.

We are constantly working on improving our models, and for this reason we must reserve the right to change the kit

contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please

understand that we cannot entertain claims against us if the kit contents do not agree in every respect with the instructions

and the illustrations.

Caution!

Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating

them safely requires a certain level of technical competence and manual skill, together with discipline and a

responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in

serious personal injury and damage to property. Since we, as manufacturers, have no control over the

construction, maintenance and operation of our products, we are obliged to take this opportunity to point out

these hazards, and to emphasise your personal responsibility.

Additional items required for the Mini Mag:

Adhesive and activator Use medium-viscosity cyano-acrylate adhesive (“medium cyano”) in conjunction with activator

(“kicker”).Do not use styrofoam cyano. Epoxy glues appear to produce strong joints, but the strength is only superficial

and the hard adhesive tends to break away from the components under stress. Hot-melt glue can also be used.

MULTIPLEX radio control equipment for the Mini Mag:

PiCO 5/6 UNI receiver 35 MHz A Order No. 5 5920

alternatively: 40 MHz Order No. 5 5921

or: Micro IPD UNI receiver 35 MHz A Order No. 5 5971

alternatively: 40 MHz Order No. 5 5972

Nano S UNI or HS 55 servo (2 x required) Elevator / rudder Order No. 6 5120

and (optional):

Nano S UNI or HS 55 servo (2 x required) Ailerons Order No. 6 5120

300 mm UNI extension lead Aileron servos, 2 x Order No. 8 5031

if necessary: 200 mm UNI separation filter cable Aileron servos, 2 x Order No. 8 5035

MagicMixer #1 for 3-channel transmitter without mixers Order No. 7 3000

Y-lead (UNI) for 4-channel transmitter with separate rudder control Order No. 8 5030

MULTIcont X-16 UNI Speed controller Order No. 7 2271

MULTIPLEX Permabatt NiMH flight battery (AA cells) 7 / 1500 mAh Order No. 15 6030

or MULTIPLEX Permabatt NiMH flight battery (AA cells) 8 / 1500 mAh Order No. 15 6037

or MULTIPLEX Li-Batt (Li-Po) flight battery P-CS 2 / 1-2000 mAh Order No. 15 7016

or MULTIPLEX Li-Batt (Li-Po) flight battery SH BX 2 / 1-2100 mAh Order No. 15 7130

Battery charger:

MULTIcharger LN-5014 DC (charge current 100 mA … 5 A) 1 - 14 NiCd/ NiMH Order No. 9 2531

and 1 - 5 Li-Po cells

Optional:

Float set Order No. 73 3069

Tuning 1: Easy Glider power set (3:1 gearbox and Permax 400) Order No. 33 2688

plus 3.5 mm Ø propeller driver Order No. 33 2310

and 8 x 3.8” propeller Order No. 73 3139

Tuning 2: Powerset „sport“ BL 22/18

Contents: motor, propeller driver, speed controller, propeller Order No. 33 2627

Tools:

Scissors, balsa knife, combination pliers, cross-point / slot-head screwdrivers for servo output arm screws and motor

screws, soldering iron.

Note: please separate the illustrated pages from the centre of this booklet.