Multiplex Technology 301 manual Min-Tr, Expo, Setting minimum steering travel

6.2.Setting minimum steering travel

You can adjust the steering travel during a race using the digi-adjustor, ensuring that the response is optimum for the track and your car at all times.

Note: this only works when the operating screen is visible!

The vertical bar on the far right of the screen shows how much steering travel you actually have available at any one time. In our example 2/3 of the possible range between minimum and maximum is available.

It is important that you are able to set a minimum travel beyond which the digi-adjustor cannot reduce the steering; this can be set within the range 30% and 100%.

Lpress until	Search for menu		MIN-TR
	point			60
MIN-TR
				%
appears
	Set minimum travel	Range:			30% to 100%
		Default:		44%

'TIP !

The maximum steering travel must be defined by adjusting the mechanical set-up for the steering servo (è6.1).

6.3.EXPO

EXPO alters the steering characteristics of your model. If you set positive values (e.g.- 50%), the steering travel will be reduced around centre, making your car easier to steer in a straight line at high speed.

Negative EXPO values produce the opposite effect, making the steering response more direct around centre.

Lpress until	Search for menu		EXPO
	point	70
EXPO
		%
appears
	Set Expo		Range:	-100% to 100%
			Increment:	5%
			Default:	0%

29