Multiplex Technology 301 manual S-Norm, S-Trav, This is the procedure

This is the procedure:
PREPARATION:
§ Set the steering trim to centre
Operate the ribbed steering trim rocker until
only the centre point is visible on the screen.
§ Set the steering travel to maximum
Operate the digi-adjustor until the maximum
steering travel is displayed on the screen.
Lpress until			S-NORM
S-NORM
		1:				MR
appears
	Select norm and	UN			UNIVERSAL normal
	rotation using the	UR			UNIVERSAL reverse
	digi-adjustor	MN			MULTIPLEX normal
		MR			MULTIPLEX reverse
Lpress until			S-TRAV
S-TRAV			1: •- 3
						%
appears
L	Select right, centre			Œ		right	0 – 110 %
	and left by turning			•		centre	+/- 50 %
	the steering wheel,
	then change using			L		left	0 – 110 %
	the digi-adjustor

28