10.1.Setting the auxiliary channel mode (menu point
The modes for the auxiliary channel are located at the point where you also set the direction of rotation and signal format for this channel.
§Use the „T“ button to search for the menu point
§Select one of the modes: 3Position, FLashing or Proportional using the digi- adjustor.
Press any menu button (except T) to return to the operating screen.
10.2.Adjusting auxiliary channel travel and centre (menu point
The steering wheel is used to select the servo position of the auxiliary channel which you wish to adjust.
§Use the „T“ button to search for the menu point
§Select left (L), centre (•) or right (Œ) with the steering wheel
§Adjust the selected point using the
Press any menu button (except T) to return to the operating screen.
11.The “toolbox” T
The “toolbox” is opened by pressing the T button. It contains the following facilities:
vSettings which affect the whole transmitter
If you select one of these settings, the screen shows the symbol
The following parameters can also be set, but they apply to each model memory individually:
vModulation (AM or FM)
vBasic servo settings (“S-NORM” and “S-TRAV”)
vTrim increment size
In this Section you will find all those settings which have not been covered in the instructions so far.
11.1.AM-FM switching (menu „T“ , AM-FM)
The PROFI CAR transmitter is the world’s first to allow you to use AM (Amplitude Modulation) and FM (Frequency Modulation) receivers without having to swap RF modules. In the
36