Dear customer,
Dear
We are delighted that you have decided to purchase a MULTIPLEX radio control system.
Your PROFI CAR 301 has all, what’s needed for ON- or
Hardware, design and operation philosophy are the same as in the two „big“ radios (PROFI CAR 403 and 707). Modifications have been made only, where required by an optimised
We wish you many hours of pleasure with your PROFI CAR.
Yours - the MULTIPLEX team
1. Safety
Radio-controlled models are not playthings!
The most important contribution to operational security and safety is your own: all you have to do is handle your radio control system and model with due care and in a responsible manner.
vCheck all electrical and mechanical connections in the model at regular intervals.
vCheck regularly that all working parts are
vCarry out regular range checks (è13.2, page 18).
vBefore you switch on, ask other modellers at the trackside which channels are already in.
vExtend the transmitter aerial to full length before running your model, and check that it is firmly seated and in good condition.
vCheck that you have selected the correct model memory for your model.
vCheck all working systems before each run: Are the servos moving in the correct direction? Are the control travels set correctly?
vAre the transmitter and receiver batteries adequately charged, and in serviceable, well maintained condition?
vUse genuine MULTIPLEX crystals, batteries and accessories exclusively.
vIf any components of your receiving system are not covered by this manual, read carefully the instructions supplied with them.
If you are in doubt about anything - don’t run your model. Check everything again in peace and quiet, and locate and eliminate the cause. If you cannot solve the problem, you will find your model shop and the MULTIPLEX Customer Service department ready and willing to help you.
!Read the notes in Section13. concerning using the system!
22
