OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Panel

The Output Terminal Panel (Figure 6) shown below is located on the right-hand side (left from control panel) of the generator. Lift up on the cover to gain access to receptacles and terminal lugs.

NOTICE

Terminal legs “O” and “Ground” are considered bonded grounds.

Output Terminal Familiarization

The “Output Terminal Panel ” (Figure 6) is provided with the following:

„„Two 120/240V output receptacles @ 50 amp „„Two Circuit Breakers @ 50 amps

„„Two 120V GFCI receptacles @ 20 amp „„Two GFCI Circuit Breakers @ 20 amps „„Five Output Terminal Lugs ( U, V, W, O, Ground)

Figure 6. Output Terminal Panel

page 20 — DCA25Usi 60 hz Generator • operation and parts manual — rev. #3 (07/19/11)

Page 20
Image 20
Multiquip DCA25USI manual Output Terminal Familiarization, Terminal legs O and Ground are considered bonded grounds