GLOBUG
DANGER - GloBug Electric Shock Hazards
ALWAYS keep electrical cords in good condition.Worn, bare or frayed wiring can cause electrical
shock, thus causing Bodily Harm or even Death.
NEVER grab or touch a live power cord with wet hands, the possibility
exists of Electrical Shock, | POWER |
CORD | |
Electrocution, and even Death! | (POWER ON) |
|
DANGER - GloBug Electric Shock Hazards
NEVER operate the GloBug or handle any electrical equipment while standing in water, while bare foot, while hands are wet, or in the rain. A dangerous electrical shock could occur causing Severe
Bodily Harm or even
Death.
DANGER - GloBug Overhead Obstructions
ALWAYS make sure the area above GloBug is open and clear of overhead power lines
and other obstructions. The tower extends in excess of 16.5 ft. (5 meters). Contact with overhead powerlines or other obstructions could result in equipment
damage, Serious Injury or Death!
Maintenance Safety
■NEVER lubricate components or attempt service on a running GloBug.
■ALWAYS allow the GloBug a proper amount of time to cool before servicing.
■Keep the GloBug in proper running condition.
■Fix damage to the GloBug immediately and always replace broken parts.
■ALWAYS use the required tool for the job application. Using damaged or worn tools or using tools inappropriate for the required application is very dangerous, and may cause damage to
the machine and
service personnel. Make sure to use the appropriate tool for the specific job.
Emergencies
■ALWAYS know the location of the nearest fire extinguisher.
■ALWAYS know the location of the nearest first aid kit.
■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
GLOBUG
