Preparation of Lighting Unit For Storage
1.Using the mast winch (Figure 18), lower the mast fully. Turn winch handle counterclockwise to lower mast.
2.Set the lighting units facing the front (Figure 22).
LIGHTING UNIT 
FACING FRONT
GLOBUG 4-SPOT — STORAGE
4.Push down the lighting unit (Figure 24). Some force is required when pushing down because of the installed springs.
PUSH DOWN
LIGHTING UNIT
Figure 22. Lighting Unit Facing Front
3.Holding the lighting unit with one hand, pull up the fold lever with the other hand (Figure 23).
Figure 23. Pushing Down Lighting Unit
5.After lighting unit has been completely pushed down, push down fold lever (Figure 24) to lock the lamp stand in place.
PUSH DOWN
LOCK LEVER
FOLD LEVER
Figure 23. Fold Lever | Figure 24. Locking Lamp Stand |
PAGE 22 — GLOBUG
