TLW-300SS —TRAILER-SAFETY GUIDELINES

CAUTION:

ALWAYS make sure the trailer is in good operating condition. Check the tires for proper inflation and wear. Also check the wheel lug nuts for proper tightness.

Explanation of Chart:

This section is intended to provide the user with trailer ser- vice and maintenance information. The service and main- tenance guidelines referenced in this section apply a wide range of trailers. Remember periodic inspection of the trailer will ensure safe towing of the equipment and will prevent damage to the equipment and personal injury.

It is the purpose of this section to cover the major mainte- nance components of the trailer. The following trailer com- ponents will be discussed in this section:

Brakes

Tires

Lug Nut Torquing

Suspension

Electrical

Brake Troubleshooting Tables

Use the following definitions with reading Table 2.

1.Fuel Cell - Provides an adequate amount of fuel for the equipment in use. Fuel cells must be empty when transporting equipment.

2.Braking System - System employed in stopping the trailer. Typical braking systems are electric, surge, hy- draulic, hydraulic-surge and air.

3.GVWR- Gross Vehicle Weight Rating (GVWR), is the maximum number of pounds the trailer can carry, in- cluding the fuel cell (empty).

4.Frame Length - This measurement is from the ball hitch to the rear bumper (reflector).

5.Frame Width - This measurement is from fender to fender.

6.Jack Stand - Trailer support device with maximum pound requirement from the tongue of the trailer.

7.Coupler - Type of hitch used on the trailer for towing.

8.Tire Size - Indicates the diameter of the tire in inches (10,12,14, etc.), and the width in millimeters (175,185,205, etc.). The tire diameter must match the diameter of the tire rim.

9.Tire Ply - The tire ply (layers) number is rated in letters; 2-ply,4-ply,6-ply, etc.

10.Wheel Hub - The wheel hub is connected to the trailer’s axle.

11.Tire Rim - Tires mounted on a tire rim. The tire rim must match the size of the tire.

12.Lug Nuts - Used to secure the wheel to the wheel hub. Always use a torque wrench to tighten down the lug nuts. See Table 4 and Figure 5 or lug nut tightening and sequence.

13.Axle - Indicates the maximum weight the axle can sup- port in pounds, and the diameter of the axle expressed in inches (see Table 3). Please not that some trailers have a double axle. This will be shown as 2-6000 lbs., meaning two axles with a total weight capacity of 6000 pounds.

14.Suspension - Protects the trailer chassis from shocks transmitted through the wheels. Types of suspension used are leaf, Q-flex, and air ride.

15.Electrical - Electrical connectors (looms) are provided with the trailer so the brake lights and turn signals can be connected to the towing vehicle.

16.Application - Indicates which units can be employed on a particular trailer.

TLW-300SS DC WELDER/ AC GENERATOR— OPERATION AND PARTS MANUAL— REV. #2 (04/07/10) — PAGE 13

Page 12 Page 14
Page 13
Image 13
Multiquip operation manual TLW-300SS -TRAILER-SAFETY Guidelines, Explanation of Chart
Page 12 Page 14

TLW-300SS specifications

The Multiquip TLW-300SS is a powerful and highly efficient water heater designed for a variety of applications in both construction and industrial settings. Known for its robust engineering and advanced technology, the TLW-300SS provides reliable hot water on demand, ensuring optimal performance even in the most challenging environments.

One of the main features of the TLW-300SS is its impressive heating capacity. With a substantial output of 300,000 BTUs, this water heater can quickly heat large volumes of water, making it ideal for tasks such as concrete curing, equipment washing, and site sanitation. The unit is equipped with a direct-fired stainless steel heat exchanger that ensures efficient heat transfer while minimizing energy consumption.

The TLW-300SS boasts dual-fuel capability, allowing users to operate the unit on either propane or natural gas. This versatility provides flexibility in fuel choices, enhancing usability in various locations and conditions. Furthermore, this water heater is designed with user-friendly controls, featuring a digital thermostat that allows precise temperature settings. This feature ensures consistent water temperatures, which is crucial for applications requiring specific heat levels.

Safety is a top priority with the TLW-300SS. The unit is equipped with various safety features, including an automatic flame failure shutdown system that prevents potential hazards by ceasing operation if the flame is extinguished unexpectedly. Additionally, it has a pressure relief valve to mitigate risks associated with excessive pressure buildup within the system.

Durability and maintenance are also significant considerations in the design of the TLW-300SS. Constructed from high-quality stainless steel, this unit resists corrosion and wear, making it suitable for both indoor and outdoor use. Easy access to key components simplifies maintenance and servicing, helping ensure that the unit operates at peak efficiency over its lifespan.

In terms of transportability, the TLW-300SS is built with a robust frame and towable design, allowing for easy mobility across job sites. Its compact size does not compromise its performance, making it able to fit into tight spaces while still delivering powerful heating capabilities.

In conclusion, the Multiquip TLW-300SS stands out in the market as a versatile, efficient, and safe water heating solution. Its combination of high heat output, dual-fuel operation, advanced safety features, and durable construction makes it a reliable choice for professionals in need of dependable hot water solutions in various work environments.
Top Page Image Contents