![](/images/new-backgrounds/1110657/11065713x1.webp)
Chapter 2 - Installation
Chapter 2 - Installation
Step 1: Connect the Modem to Your System
Turn off your computer. Placing the modem in a convenient location, connect it to your computer’s serial port, to the telephone line, to your leased line, to AC power, and, optionally, to your telephone.
PHONE | LINE LEASED | EIA RS232C |
|
|
VOLUME | POWER |
|
or
MultiModemII connections with V.92 transformer and V.90 transformer.
Connect the Modem to Your PC
Plug one end of the serial cable into the
Connect the Modem to the Telephone Line (Dialup Connection)
Plug one end of the modular phone cable into the modem’s LINE jack, and the other end into a public switched telephone network (PSTN) wall jack.
Important: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack or the line cable into the PHONE jack.
Note: Regulatory agencies may impose certain restrictions on equipment connected to public telephone systems.
Connect theTwo-Wire Leased Line
MT5600BA – Plug one end of a
MT5600BL – Plug one end of a
MT5600BA/BL Series User Guide | 7 |