8
2
PANELDESCRIPTION
2
C.TONE CHANNELENTER KEY
Select the continuous tone channel using [CH Up]/[CH Down] keys
to change the tone frequency/code setting after pushing this key for
permanent operation.
TALK AROUND KEY
Turn the talk around function ON and OFF.
•The talk around function equalizes the transmit frequency to the re-
ceive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY
Push to toggle the IF bandwidth between wide and narrow.
• The wide passband width can be selected from 25.0 or 20.0 kHz using
the CS-F50
CLONINGSOFTWARE
. (PMR or BIIS PMR operation only)
Ask your dealer for details.
DTMF AUTODIALKEY
➥Push to enter the DTMF channel selection mode. Then select
the desired DTMF channel using [CH Up]/[CH Down] keys.
➥After selecting the desired DTMF channel, push this key to trans-
mit the DTMF code.
DTMF RE-DIALKEY
Push to transmit the last-transmitted DTMF code.
CALLKEYS
Push to transmit a 2/5-tone/BIIS ID code.
•Call transmission is necessary before you call another station de-
pending on your signalling system.
•The [Call A] and/or [Call B] keys may be available when your system
employs selective ‘Individual/Group’calls. Ask your dealer which call is
assigned to each key.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 8 (1,1)