Muratec IC-F50, IC-F60 D TX code number edit

16
3
CONVENTIONALOPERATION
3
DTX code number edit (PMR or BIIS PMR operation only)
If the transceiver has [TXCode CH Select] or [TX Code Enter] as-
signed to it, TX code contents can be edited within the allowable
digits.
TO EDIT ATX CODE VIA [TX CODE CH SELECT] KEY:
qPush [TX Code CH Select] to enter the TX code channel selec-
tion mode.
• Select the desired channel using [ ]/[ ] if necessary.
wPush [TX Code CH Select] for 1 sec. to enter the TX code edit
mode.
ePush [TX Code CH Select] to select the desired digit to be
edited.
rSet the desired digit using [ ]/[ ]/[TX Code CH Up]/[TX
Code CH Down].
tPush [TX Code CH Select] to set the digit. The editable digit will
move to the right automatically.
yRepeat rand tto input all allowable digits.
uPush [Call] or [PTT] to transmit the selected TX code.
TO EDIT ATX CODE VIA [TX CODE ENTER] KEY:
qSelect the desired TX code channel via [TX Code CH Up]/[TX
Code CH Down].
wPush [TX Code Enter] to enter the TX code edit mode.
ePush [TX Code Enter] to select the desired digit to be edited.
rSet the desired digit using [ ]/[ ]/[TX Code CH Up]/[TX
Code CH Down].
tPush [TX Code Enter] to set the digit. The editable digit will move
to the right automatically.
yRepeat rand tto input all allowable digits.
uPush [Call] or [PTT] to transmit the selected TX code.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 16 (1,1)