24
4
BIIS OPERATION
4
DDCalling back from the queue channel
qWhile in the standby condition, push [P1] (Digital) for 1sec. to
enter queue memory channel selection mode.
wPush [ ]/[ ]to select the desired record.
ePush [P0] (Call) or [PTT]* to call.
*PTTcall can be made only when PTT call capability is permitted.
NOTE:When no answer back is received, the transceiver re-
peats the call 3 times (default) automatically, and “”is
displayed during each call. However, an error beep sounds
and “”is displayed when no answer back is received
after the calls.
rPush [PTT] to transmit; release to receive.
tPush [P3] (Moni(Audi)) to send the “Clear down” signal.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 24 (1,1)