30
4
BIIS OPERATION
4
■Transmitting an SDM

DDGeneral

The short data message, SDM, can be sent to an individual station
or group stations. Also, 8 SDM memory channels are available and
the messages can be edited via PC programming.

DDTransmitting an SDM

qWhile in the standby condition, push [P1] (Digital), then push
[ ]/[ ]to select the desired station/group code.
wPush [P1] (Digital) again, then push [ ]/[ ]to select the de-
sired SDM.
Or, you can select the desired SDM using [Status Up]/[Status
Down] key directly.
ePush [P0] (Call) or [PTT]* to transmit the SDM to the selected
station/group.
*PTTcall can be made only when PTT call capability is permitted.
•2 beeps will sound and the transceiver returns to the standby con-
dition automatically when the transmission is successful.
SDM is displayed.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 30 (1,1)