18
3
CONVENTIONALOPERATION
3
■User set mode
User set mode is accessed at power ON and allows you to set
seldom-changed settings. In this case you can “customize” trans-
ceiver operation to suit your preferences and operating style.
Entering the user set mode:
qWhile pushing and holding [ ] and [ ], rotate [VOL] to enter
the user set mode at power ON.
wPush and hold [P0] to enter user set mode. Push [P0] momen-
tarily to select the item.
Then push [ ] and [ ]to set the desired level/condition.
Available set mode functions:
•Backlight : ON, Auto or OFF
•Beep : ON or OFF
•SQL Level : 0 to 255
•AF Min level : ON or OFF
•Mic Gain : 1 to 5
•Battery Voltage : ON or OFF
ePush and hold [P0] again to exit set mode.
User set mode is also available using a programmable key. Please
refer to p. 11 [User Set Mode] section.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 18 (1,1)