N-Tron 708M12 user manual Sysip, Configmode, Staticip, Staticsubnetmask, Staticgateway

CLI Commands, Continued…

Set or Show the System IP Configuration

Command Name	sysip
Description	Set system IP configuration mode, IP address, subnet mask, and gateway
	If no parameters are specified, this command will show the system IP addresses. Static
	IP, subnet mask, or gateway can only be set while in static configuration mode. All
	system addresses must be formatted as: xxx.xxx.xxx.xxx.
Syntax	sysip [-c config_mode] [-i static_ip] [-s static_subnet_mask] [-g static_gateway]
Parameters	-c config_mode
	s(tatic) or d(hcp).
	-i static_ip
	Static IP address ( for static config mode ).
	-s static_subnet_mask
	Static sub net mask ( for static config mode ).
	-g static_gateway
	Static gateway address ( for static config mode ).
Example	N-TRON/Admin> sysip
	IP Configuration Mode : Static
	Static IP Address	: 192.168.1.225
	Static subnet Mask	: 255.255.255.0
	Static gateway	: 192.168.1.1
	N-TRON/Admin> sysip -c dhcp
	IP Configuration Mode : DHCP (has been changed)
	Static IP Address	: 192.168.1.225
	Static subnet Mask	: 255.255.255.0
	Static gateway	: 192.168.1.1
	Do you Want to Save Changes and Restart the System Now [y/n]?
	…
	N-TRON/Admin> sysip -i 192.168.1.119 -s 225.225.225.0 -g
	192.168.1.1
	IP Configuration Mode : Static
	Static IP Address	: 192.168.1.119 (has been changed)
	Static subnet Mask	: 225.225.225.0 (has been changed)
	Static gateway	: 192.168.1.1 (has been changed)
	Do you Want to Save Changes and Restart the System Now [y/n]?
	…
NOTES

Revision 071108 Page 87 of 102