N-Tron 708M12 user manual Ping, Targetname, Count, Timeout, Syserr clear, Clear

Ping a Host

Command Name	ping
Description	Ping a host
Syntax	ping [-t] [-n count] [-w timeout] target_name
Parameters	target_name
	IP Address or host name.
	-t
	Ping the specified host until stopped.
	To see statistics and continue - type Space;
	To stop - type Control-C.
	-n count
	Number of echo requests to send.
	-w timeout
	Timeout in milliseconds to wait for each reply.
Example	N-TRON/Admin> ping 192.168.1.119
	…
	N-TRON/Admin> ping –n 6 192.168.1.119
	…
	N-TRON/Admin> ping –t 192.168.1.119
	…
	N-TRON/Admin> ping –w 2000 192.168.1.119
	Reply from 192.168.1.119: time=970ms
	Reply from 192.168.1.119: time<10ms
	Reply from 192.168.1.119: time<10ms
	Ping statistics for 192.168.1.119:
	Packets: Sent = 4, Received = 3, Lost = 1 (25% loss)
	Approximate round trip times in milliseconds:
	Minimum = 0ms, Maximum = 970ms, Average = 320ms
Notes
Reset the Switch
Command Name	reset
Description	Reset (reboot) the switch
Syntax	reset
Parameters	None
Example	N-TRON/Admin> reset
	Performing Soft-Reset...
	…
Notes
Show or Clear the Last System Error
Command Name	syserr
Description	Show or clear the last system error
	If clear is not supplied, then the last system error is displayed.
Syntax	syserr [clear]
Parameters	clear
	Clear the last system error.
Example	N-TRON/Admin> syserr
	Last System Error: None.
	N-TRON/Admin> syserr clear
	Last System Error: Cleared.
Notes

Revision 071108 Page 85 of 102