N-Tron 708M12 user manual CLI Commands, Continued…, Show, Add, or Delete ARL Entries

CLI Commands, Continued…

Show, Add, or Delete ARL Entries

Command Name	arl
Description	Show, Add, or Delete Arl Entries.
Syntax	arl show showmct add mac port cpu static vid del[ete] mac vid
Parameters	show
		Show entire ARL table.
	showmct
		Show entire ARL MCT (Multicast Index) table.
	delete
		Delete MAC address.
	add
		Add MAC address.
	mac
		MAC Address.
	port
		Port Number.
	cpu
		1 = Send to CPU also.
	static
		1 = This is a static address; 0 = Non-Static.
	vid
		VLAN ID (0-4095)
Example	N-TRON/Admin> arl show
	No. Val Age Pri Mod Usr Sta VLAN								MAC	Port(s)
	---- --- --- --- --- --- --- ---- ----------------- ----------
	1	1	1	0	0	0	1	1 00:07:af:ff:b8:00 CPU
	2	1	0	0	0	0	0	1 00:19:b9:03:aa:77 TX3
	N-TRON/Admin> arl showmct
	No. Idx Val Port Mask					Port(s)
	--- --- --- ---------- ----------
	1	0	1 0x00000000 (None)
	2	1	1 0x00000001 TX1
	N-TRON/Admin> arl add 00:19:b9:03:aa:79 3 0 1 1
	N-TRON/Admin> arl del 00:19:b9:03:aa:79 1
Notes

Revision 071108 Page 83 of 102