NAD T175 owner manual Copy, PUNCH-THROUGH Macro, Execute PUNCHED-THROUGH Macro

OPERATION

USING THE HTRC 1 REMOTE CONTROL

ENGLISH

FRANÇAIS

ESPAÑOL

ITALIANO

DEUTSCH NEDERLANDS SVENSKA

РУССКИЙ

5Press the [AMP] button in the DEVICE SELECTOR page.

6Use [] to select between “No” (desired punch-through key will not be saved) and “Yes” (desired punch-through key will be saved and process is completed).

Note

The HTRC 1’s [VOL] keys are pre-programmed as “punched-through” for all Device Select pages: [VOL] will operate the NAD’s master-volume regardless of the currently selected device. The [SURR], [CENT] and [SUB] CHANNEL VOLUME controls similarly are pre-programmed as punched- through.

PUNCH-THROUGH MACRO

A stored macro command can also be “punched-through.”This provides a way to execute a macro with a single keys press.

Example: Punch-through macro command stored at [0] to the [RTN] key of [VCR] page.

1Press [VCR] in the DEVICE SELECTOR page.

2Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [] to scroll to “Pun Thr”.

3Press [ENTER].

4Press [RTN] button.

5Press the [MACRO] button in the DEVICE SELECTOR page.

6Press [0] button – this is the key where the macro command is associated.

7“Save” and “No?” are shown in the display. Use [] to select between “No” (desired punch-through macro command will not be saved) and “Yes” (desired punch-through macro command will be saved and process is completed).

EXECUTE PUNCHED-THROUGH MACRO

To recall the punched-through macro command as above example, press [VCR] in the DEVICE SELECTOR page and then press [RTN] – the macro command will then be executed.

Refer also to the “MACRO” section below for information on how to setup macros.

COPY

This function allows you to copy functions from one key to another.

Example: Copy “PAUSE” [ ] command from DVD page to the AMP [ ] button.

1Press [AMP] in the DEVICE SELECTOR page.

2Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [] to scroll to “Copy”.

3Press [ENTER].

4Press [DVD] from DEVICE SELECTOR page.

5Press [ ] button - this is the function key that will be copied.

6Press [AMP] from DEVICE SELECTOR page.

7Press [ ] button - this is the button where the function will be copied.

8Use [] to select between “No” (desired function key will not be copied) and “Yes” (desired function key will not be copied and process is completed).

Note

The copy and punch-through functions are similar. However, if you copy a command and then subsequently delete, or over-write the original (source- key) command, the copied-to key’s command remains unchanged. If you punch-through to a command and then delete or over-write the original key, the punched-through functions also change accordingly.

40