NAD T175 owner manual Rear Panel, English, Svenska Nederlands Deutsch Русский

						IDENTIFICATION OF CONTROLS
									REAR PANEL
		1	2	3	4	5	6	7	8		ENGLISH
											FRANÇAIS
9	10	11	12	13	14		15	16		18	ESPAÑOL
									17

ATTENTION!

Please make sure that the T 175 is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all associated components while making or breaking any signal or AC power connections.

ITALIANO

17.1 CH INPUT: Connect to the corresponding analog audio outputs of a multichannel source component such as a DVD-Audio or multichannel-SACD player or external multichannel decoder (disc copy protected formats only allow analog signal transfer). Typically, these sources will produce 5.1-channel output, in which case the Surround Back jacks are left unconnected. The signals present at these jacks may be heard by selecting Source 7 (7.1 Channel Input is defaulted to this Source).

There is no bass-management or other processing (other than master- volume control) available to this 7.1 Channel Input. While the multi- channel audio outputs of a DVD-Video player can be connected to these jacks, using the T 175’s own Dolby Digital and DTS decoding and digital-analog converters via a digital connection will usually produce superior results.

2AUDIO PRE-OUT:The Audio PRE- OUT makes it possible to use the T 175 as a pre-amplifier to external power amplifiers for some or all channels. Connect FRONT L, FRONT R, CENTER, SURR R, SURR L, SURR- BL, SURR-BR and CENTER to the respective channel input of a power amplifier or an amplifier driving the corresponding applicable speakers.

Unlike the full range channels, there is no power amplifier built-into the T 175 for a subwoofer. Connect the SUBW 1 or SUBW 2 output or both to powered (“active”) subwoofers or to power amplifier channels driving a passive system.

3MP DOCK: The T 175 is equipped with a data port in the rear panel where an optional “NAD IPD 1 Dock with iPod” (NAD IPD 1) can be plugged in. Connect the “MP DOCK (DATA PORT)” jack of the T 175 to the corresponding “DATA PORT” socket of the optional NAD IPD 1.

4FM, AM ANTENNA INPUT: The supplied wire “dipole” FM antenna will connect to the FM connector using the supplied “balun” adapter. It will usually work best when mounted on a vertical surface such as a wall, with arms fully outstretched forming a horizontal “T” perpendicular to the origin point of the signal.

Connect the supplied AM loop antenna to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna. See also section about “LISTENING TO RADIO”.

5XM MODULE INPUT (North America version only): Connect XM radio cable to this socket. Follow the instructions that came with your XM radio. With XM radio, there are more than 100 channels of music, news, sports, comedy, talk and entertainment. You will find that the coverage is continent wide. The music quality is digital with many commercial-free music channels.

NOTES

Questions? Visit www.xmradio.com

Listeners can subscribe by visiting XM on the Web at www.xmradio.com or by calling (at the time of printing this manual) XM’s Listener Care at

(800)853 9696. Be ready with your Radio ID that can be found on the radio by selecting Channel 0.

DAB MODULE INPUT (Europe version only): Plug-in the other end of the Mini-Din connector from the NAD DAB Adaptor DB 1 module output port into this socket. The T 175 is compatible only with NAD DAB Adaptor DB 1 so check with your NAD dealer for this module’s availability. With DAB, you can receive CD-like quality programs without any annoying interference and signal distortion.

SVENSKA NEDERLANDS DEUTSCH

РУССКИЙ