NAD T175 owner manual Italiano Svenska Nederlands Deutsch, Delete, Rename, Macro

OPERATION

USING THE HTRC 1 REMOTE CONTROL

DELETE

Each key can have several functions types stored. However, only the highest priority type will be active. When you delete a function, a lower priority function type may become active. To completely erase the functionality

of a key, you may need to execute the Delete function multiple times. For example; if you delete a learned command, a lower priority command may become active. The order of priority for each function type is:

1Punch Through

2Learned

3Copied Library Command

4Default Library Command

Example: Delete punch-through “SURR MODE” function key from DVD page (refer to PUNCH-THROUGH example above).

1Press [DVD] in the DEVICE SELECTOR page.

2 Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [ ] to scroll to “Delete”.

5 Use [ ] buttons to select the first character of the name (“D” from the alphabetical list).

6 Press [ ] button to select the character and correspondingly move forward to the next position. (Press [ ] to go back to the previous character). Repeat this process for each character in sequence.

7Since “DVD” is only three characters and “Input 1” is six character spaces, overlap the remaining characters with a space. Space or blank can also

be selected using [ ] buttons – scroll up to the blank character.

8Press [ENTER] when you have finished the renaming sequence.

9 Display shows“Save” and“No” - use [ ] to select between“No” (new name will not saved) and“Yes” (new name will be saved and process is completed).

ENGLISH

FRANÇAIS

ESPAÑOL

3Press [ENTER].

4Press [SURR MODE] button.

5 Use [ ] to select between “No” (desired function key will not be deleted) and “Yes” (desired function key is deleted and process is completed).

RENAME

All keys can be renamed except MACRO key.

Example: Rename “Input 1” key of “AMP” page to “DVD”.

1Press [AMP] in the DEVICE SELECTOR page.

2 Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [ ] to scroll to “Rename”.

3Press [ENTER].

4Press [1] button.

MACRO

A “macro” command is a series of two or more remote codes issued automatically from a single keypress. You might use a macro to automate a simple command sequence, such as, “Turn on the DVD player and then press “play.’” Or you might compose an elaborate macro to power up

an entire system, select a source, choose a Listening Mode, and begin playback—again, all from a single keypress. The HTRC 1 can store one macro to all its function keys except MACRO.

Macros will be executed with the same timing as they were recorded. The length of time each command is sent will also correspond to the same length of time the key will be held down while recording.

Example: Record a Macro to the [0] key to turn ON the NAD T 175, Select [Input 1], turn ON the NAD T515 DVD Player, and commence disc playback of the connected Input 1 device (as in the NAD T515 DVD player):

1Press [AMP] in the DEVICE SELECTOR page.

2 Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [ ] to scroll to “Macro”.

3Press [ENTER].

4Display shows “Macro” and “Key?”- press [0].

5 Press [AMP], [ON], [1], [DVD], [ON] and [ ](Play). The length of time each command is entered will also correspond to the same time sequence the macro command is executed.

6Press [MACRO] to end the sequence.

ITALIANO

SVENSKA NEDERLANDS DEUTSCH

7 Use [ ] to select between “No” (macro command will not be saved) and “Yes” (macro command will be saved and process is completed).

РУССКИЙ

41