NAD T175 owner manual Creating Presets, Recalling Presets

OPERATION

USING THE T 175 –Setup MENU

A/V PRESETS

The T 175’s simple but powerfully flexible system of “Presets” allows you to customize virtually every aspect of your audio-video playback, and recall them with a single key-press. The parameters “Listening Mode”, “DSP Options” and “Tone Controls” accessible via the “Main Menu” together with “Speaker Setup” and “Display Setup” configurable through “Setup Menu” are stored together as a single Preset.

You might create one Preset optimized for pop music and another for classical. One more Preset can be set up to recall each family member’s favorite setting or one for fully cinematic home-theater playback and yet another one for late-night movies, with each Preset fine-tuned to a particular scenario or preference.

CREATING PRESETS

Creating a Preset consists simply of storing a complete set of the parameters set forth in the “Listening Mode”, “DSP Options” and “Tone Controls” accessible via the “Main Menu” together with “Speaker Setup” and “Display Setup” configurable through “Setup Menu”.

Scroll to “A/V Presets” using the [	] keys to save a collection of said parameter settings to a
Preset number and by a combination of pressing the [		] keys, you can selectively include in the

particular Preset any of the above-mentioned parameter settings by choosing “Yes”. If you decide not to include in the particular Preset a certain parameter setting, select “No”.

Now in order to save the settings chosen for the particular Preset number, scroll down to “Save Current Setup to Preset” and press the [] key. If you chose to load instead the default settings, scroll down to “Load Defaults to Preset” and press the [] key to restore the default settings.

In addition to the parameter settings, the Preset label itself can be assigned a new name. This new

Name will be shown in the VFD as well as on the OSD.

To rename the Preset label, scroll to “Name” and press [] to go the character. Then, press [] to

pick and select through the alphanumeric selections. Press [] to move to the next character or back to the previous character and at the same time save the changes done on the current character.

NOTE

The selected Preset remains in force until you select a different Preset.

RECALLING PRESETS

You may recall a Preset at any time using the HTRC 1 remote control.

Press the HTRC 1’s AV PSET key and then the numeric key 1-5 corresponding to the desired preset number. The newly recalled Preset will then manifest or replace the previous Preset (if any).

ENGLISH

FRANÇAIS

ESPAÑOL

ITALIANO

SVENSKA NEDERLANDS DEUTSCH

РУССКИЙ

29