CONNECTIONS
PAGE 19
ConnectingtoOptionalEquipment
Enjoying 2 Channel Digital Stereo Sound
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).
75 ohm coaxial cable
Amplifier equipped with a digital audio input
To Digital Out | To | To Digital Audio Input |
or Video Input |
| |
(COAXIAL or |
|
|
OPTICAL) |
|
|
To
or Video Out | Front speaker |
| |
| (Left) |
| TV |
Front speaker (Right)
DTS Sound
Like Dolby Digital, DTS is a multichannel digital format with 6 discrete channels of sound. Some DVDs are encoded using the DTS system. Although the NAD T550 doesn’t decode a DTS encoded DVD, it will pass on the DTS digital signal through either the coaxial or optical digital output.
Connect either the coaxial or optical digital output to a decoder or receiver (such as the NAD T760) capable of decoding DTS signals.
|
|
| Amplifier equipped |
|
| 75 ohm coaxial cable |
| with a DTS decoder | |
|
|
|
| |
| To | To Digital Audio Input |
| |
To Digital Out | or Video Input |
| ||
|
|
| ||
(COAXIAL or |
|
|
|
|
OPTICAL) | To |
| Center |
|
| Front | speaker | Front | |
| or Video Out | |||
| speaker |
| speaker | |
|
|
| ||
|
| (Left) |
| (Right) |
|
|
| TV | Sub woofer |
|
|
|
| |
|
| Rear speaker |
| Rear speaker |
|
| (Left surround) |
| (Right surround) |
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
Notes
Refer to the owner’s manual of your audio receiver as well.
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.
To listen to the DTS audio CDs, you have to select AUDIO mode to “Stereo”. (Refer to page 24)