NAD T550DVD owner manual SelectingAudioOutput, Page, Initial Setup Operation, Press

PAGE 34

INITIAL SETUP OPERATION

SelectingAudioOutput

Selecting Audio Output

If you have a audio system that has only 2 speakers L/R input, you must change the setting of speaker output, from Multichannel to Two channel.

At the SET UP screen

1 Press the SET UP button, during stop mode.

2	Press	to select Audio Output and press
	to select “ PCM only” or “Stream/PCM”.

Disc Audio	English
Disc Subtitle	English
Disc Menu	English
Rating	Theatrical
Password	Change
TV Aspect	16:9 Wide
TV Mode	Auto
FLT Brightness	100%
Audio Output	PCM only
Speaker Output	Two Channel

3 Press to select Speaker Output and

press to select “Multichannel” or Two channel.

Disc Audio		English
Disc Subtitle		English
Disc Menu		English
Rating		Theatrical
Password		Change
TV Aspect		16:9 Wide
TV Mode		Auto
FLT Brightness		100%
Audio Output		PCM only
Speaker Output		Multichannel
Center	Surround	Subwoofer

Each DVD disc has a variety of audio output options. Set the player’s DIGITAL AUDIO output according to the type of audio system you use.

PLAYBACK	OUTPUT
DISC	Stream/PCM	PCM
96 kHz
LINEAR PCM	PCM	PCM
DVD
DTS DVD	DTS bit Stream	DTS bit Stream
DOLBY	DOLBY DIGITAL	PCM
DIGITAL DVD	bit Stream
MPEG DVD	MPEG bit Stream	PCM
Video CD
Audio CD	PCM	PCM
DTS Audio CD	DTS bit Stream	DTS bit Stream

If you have a receiver equipped with a Dolby Digital Decoder, you can listen to Dolby Digital Sound using the “Stream/PCM” setting.

4 When you select the “Multichannel”, select Center speaker, Surround speakers, Subwoofer on or off.

Press to move the cursor to desired speaker and press “ENTER” to toggle the speaker output.

To exit SET UP menu

Press RETURN or SETUP button.

Note

When connected through Digital Audio Output and “PCM only” is selected at the Audio Output set-up, Speaker Output should be set to “Two Channel”.

Otherwise, center and surround channels’ sound will not be heard when playing discs recorded in multichannel such as Dolby Digital 5.1 and DTS.