NAD T550DVD Enjoying Dolby Pro Logic Surround Sound, ConnectingtoOptionalEquipment, Page

PAGE 18

CONNECTIONS

ConnectingtoOptionalEquipment

Enjoying Dolby Pro Logic Surround Sound

Dolby Pro Logic Surround

You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decoding. If you A/V receiver has a Dolby Pro Logic decoder. Refer to the following connecting diagram.

Connect one or two rear speakers.

The output sound from the rear speakers will be monaural even if you connect two rear speakers.

To Video Out	To ANALOG
	Audio Out
Video cable	Audio cable

Connection example

To Audio Input

Amplifier equipped

with Dolby Pro
Logic Surround
To Video Input	Center
Front	speaker	Front
speaker		speaker
(Left)	TV	(Right)
Rear speaker		Rear speaker
(Left)		(Right)

With a receiver equipped with Dolby Digital (AC-3)

Connect the equipment the same way as described in “Enjoying Dolby Digital (AC-3) Sound” on the previous page.

Refer to that receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.

Note

Change the setting of speaker output in Initial Setup, from Multichannel to Two channel. (Refer to page 34)

Warning

Do not set the Audio Output of this DVD player to “Stream/PCM” unless you are connecting either the coaxial or optical digital audio jack of this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function. Do not connect both the coaxial and optical sockets to the same decoder. High volume sound may damage your hearing as well as the speakers.