Nakamichi SoundSpace 5 owner manual AM antenna connection, Stereo Music System

Stereo Music System

Connections

AM antenna connection

AM wire antenna

Supplied AM loop antenna

FM	AM Antenna
Antenna

75Ω

Unbal. GND Loop

Ground

1.Assemble the supplied AM loop antenna.

2.Connect the loop antenna lead to the AM Antenna terminal.

3.Move the loop antenna around and install it in the location with optimum reception sensitivity.

-If reception condition with the supplied AM loop antenna are not satisfactory, extend an antenna wire (ordinary vi- nyl-coated lead wire) about 4 to 5 meters outdoors and connect the end of the wire to the AM antenna terminal marked “AM”. The loop antenna should remain connected

also when using an outdoor antenna.

CAUTION

If an outdoor AM antenna is used, grounding must be pro- vided for protection against lightning.

Establishing a ground connection

1.Provide a single-conductor wire (ordinary vinyl-coated lead wire) and connect one end of the wire to the AM antenna terminal marked "GND".

2.Connect the other end of the wire to an earth ground, for example more than 50 cm length of exposed wire or a metal bar buried in the ground, or a water pipe (lead pipe) with

complete grounding.

CAUTION

Never connect the ground wire to a gas pipe to avoid ex- plosion hazard in case of a lightning strike.

11