Stereo Music System
Troubleshooting
FM broadcast is supposed to be in stereo, but sound
is monaural.
-Verify that antenna is connected properly.
-Press and hold down the Mono button (for at least 1 second)
to end mono mode.
................................................................................................
FM or AM broadcasts cannot be received.
-Adjust position and/or orientation of antenna.
-Verify that antenna is connected properly.
................................................................................................
Remote control cannot be operated.
-Verify that power is supplied to the unit.
-Verify that batteries are inserted properly.
-Replace both batteries with fresh ones.
-Point remote control at sensor when operating.
-Remove any obstacles between remote control and the main unit.
-Do not operate remote control units of other equipment at
the same time.
................................................................................................
FM or AM broadcast reception is noisy.
“E-MECHA” indication appears.
- Adjust position and/or orientation of antenna. | - Turn the unit off and then on again. |
| |
- Increase distance between this unit and other electrical equip- |
|
ment. |
|
31
