R
INSTALLATION
INSTRUCTIONS
G E M - R P 3 D G T L
Digital KeypadThis Guide includes programming instructions for the following control panels: ∙
∙GEM-P1632
∙
∙
Quick Start:
1.Referring to the control panel wiring diagram, connect siren, aux. power, pgm. output, remote bus, earth ground, zone and telephone wiring.
NOTE: See Installation Instructions for the appropriate control panel.
GEMINI
17 ENT A1INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
2.Connect AC power first and then the battery.
3.Configure the keypad (see page 3).
4.Access the Easy Menu Driven (Dealer Program) Mode:
Press 456789A
Dealer Code
For the
A 1 | 2 | 3 | NEXT/YES |
E | |||
B 4 | 5 | 6 | D PRIOR/NO |
F | |||
C 7 | 8 | 9 | AREA |
0 G |
COMPUTERIZED SECURITY SYSTEM
Press NO(F) Until “17” appears on the keypad display.
Press YES (E) To Enter Easy Menu Driven Dealer Program Mode.
The Easy Menu Driven Program Mode will allow you to complete all basic programming functions by answering questions which will allow the automatic programming of the control panel.
FFor the GEM-P816 and GEM-P1632, turn to page 5
FFor the GEM-P3200 and GEM-P9600, turn to page 10
This guide is to be used in conjunction with the Programming Instruction Manual for the
respective control panel.
© Napco 1999 |
| WI982A 6/99 |