Napco Security Technologies GEM-P1632 Direct Address Program Mode, Keypad Programming Overview

DIRECT ADDRESS PROGRAM MODE

This is an extension of the Dealer Program Mode. This method of programming is used in conjunction with the Keypad Programming Worksheets contained in the control panel programming guide. Refer to these worksheets to identify the 4-digit location (address) of the feature to be programmed. An illustrative example is provided on the next page.

KEYPAD PROGRAMMING OVERVIEW

Direct Address Programming allows you to go directly to the address locations and change the data entries to customize your control panel options. Whereas the Easy Menu Program Mode is a simple quick start guide with limited options, the Direct Address Program Mode is more flexible allowing you to change all the options.

It consists of multiple address locations with two data entry locations each (left and right) as shown in the adjacent diagram.

ADDRESS	DATA ENTRY
	LOCATIONS
LOCATIONS
	LEFT DIGIT	RIGHT DIGIT
0000	3	C

0000 TO 4095

HEXADECIMAL DATA: BLANK (•) = No Options 1 to 9 = Entries 1 to 9

0 = Entry of 10

B to F = Entries 11 to 15

ACCESSING DIRECT ADDRESS PROGRAM MODE

17 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

(Direct Entry)

1Enter the Dealer Security Code (default = 456789) for a new panel or enter your custom Dealer Program Code if programmed.

2Press A

3Press NO (F) repeatedly until function “17“ (Activate Program Mode) is displayed.

4Press YES (E) to enter the Dealer Easy Program Mode.

5Press Cto enter the Dealer Address Program Mode.

ENTERING DATA IN THE ADDRESS PROGRAM MODE

1Press A

2	Enter the 4 digit Address location	A
3	Enter the 2 digit data
4	Press Dto save.

Address #

Use 0-9for digits 0 - 9

D

Data

Use 1-9for digits 1 - 9 BLANK= 0

EXAMPLE: Program an Alarm Timeout of 30 seconds. Press A0712 1G4D

∙Alarm Timeout location = 0712

∙30 second timeout = 1E

A/10 = G0 B = G1 C = G2 D = G3 E = G4 F = G5

14