24
GLOWING EMBERS
DOOR INSTALLATION
Tear the embers into small pieces and place on the ported area of the burner. Care should be taken to shred the embers into thin, small irregular pieces as only the ex- posed edges of the fibre hairs will glow. The ember mate- rial will only glow when exposed to direct flame; however, care should be taken to not block the burner ports. Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition. PHAZERT M logs glow when
FLANGE
HOODCLIP
UPPERLOUVRE
DOOR OPENING AND CLOSING: The upper lou- vres must be removed to allow the door to be opened or closed. To ac- cess the lower door latch, open the valve control door. Release the top and bot-
exposed to direct flame.
CHARCOAL EMBERS
49
DOOR LATCH
tom door latches, located at the right side of the door.
Randomly place the embers around the bottom brick pan- els in a realistic manner but not in contact with the flames. Keep ember dust away from burner ports to avoid plugging them.
Fine dust found in bottom of bag not to be used. PHAZERTM logs, and embers glow when exposed to direct flame. Use only certified PHAZERT M logs, glowing embers and char- coal embers available from your Napoleon / Wolf Steel Ltd. dealer.
UPPER LOUVRE BRACKETS & HOOD
FIGURE 50
GLOWING EMBERS
Attach the hood with louvre brackets by pressing the top flange of the bracket into the clips along the top of the louvre opening with louvre securing tabs facing out.
47
LOGO PLACEMENT
Remove | the |
|
|
|
backing | of the |
|
|
|
logo supplied and | ½" |
| ||
place on the glass |
|
|
| |
|
|
| ||
viewing door, as |
|
| LOGO | |
indicated. |
|
|
|
½"
LOWER LOUVRE BRACKETS & HINGE SCREEN
FIGURES 51 a-b
AB
Using 6 screws, attach the lower louvre brackets and hinge screen as illustrated. Be sure to install the louvre brack- ets over the hinge screen.
GVFL INSTALLATION
FIGURE 48
HOOD
BRACKET
SLOT
52LOUVRE
53LOWER LOUVRES (VALVE CONTROL DOOR)
TO INSTALL THE UP- PER LOUVRES: Insert the upper louvres into the slots on both brackets. Press the top flange of the hood into the four clips located along the top of the unit as shown.
TO INSTALL THE LOWER LOUVRE ASSEMBLY: At- tach each hinge to the fire- box with 2 screws.
Optional plated door trim, and arched door facia are avail- able at your local Napoleon dealer.